Stainless Steel 316L Stud Bolt

Din 1.4404 Half Threaded Stud Bolt, Din 1.4404 Double End Stud Bolt, SS 316L Half Threaded Rod , UNS S31603 Tap End Stud Bolt, Stainless Steel 316L Full Threaded Rod.

During the welding process, Stainless Steel 316L Stud bolts with a high carbon content are more likely to rust than other types. At the boundary of the heat-affected weld zone, they are prone to the development of carbide precipitated. However, if one were to regulate the quantity of carbon present, the resulting alloy would be designated with a superscript L added to the end of the grade number. For example, stainless steel 316L stud bolts would have this designation. This variant of alloy grade 316 has been improved with nitrogen.

The SS 316L Half Threaded Rod has a tendency to become weaker and finally lose its strength when the carbon concentration in the alloy diminishes. If the alloy is subjected to excessive stress, the low yield strength will eventually be depleted. Although the strength of 316l stainless steel high tensile bolts does not measure up to that of the original grade 316, it is comparable to the alloy used for the older material.

industrial
ss 316l stud bolt

About Stainless Steel 316L Stud Bolt

ASTM A193 Stainless Steel 316L Double End Threaded Rod, 316L SS Tap End Threaded Rod, ASME SA193 SS 316L Full Threaded Stud Bolt, Stainless Steel 316 Flange Stud Bolt, ASME SA193 SS 316 Double End Stud Bolt With Reduced Shank.

Additionally, the pitting resistance of the UNS S31603 Tap End Stud Bolt has improved thanks to nitrogen’s incorporation. Steel suitable for use in marine environments is sometimes called marine grade steel, and it is within the capabilities of manufacturers to produce dual-certified grades like 316/316L. Despite the shift in chemical composition, the qualities of bolts and nuts made of stainless steel 316l remain the same. As a result, a stainless steel 316l hex head bolt demonstrates behavior analogous to grade 316 in terms of corrosion-resistant properties and mechanical capabilities.

Stainless Steel 316L Stud Bolt Specification

SpecificationsASTM A 193 / ASME SA 193
StandardDIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards
SizeM3 - M100 | 3/6″ - 4″ | Custom Sizes
Stud Bolt Length3 mm - 200 mm | Custom Sizes
DimensionsDIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads availableUNF, BSW, BSF, METRIC, UNC, or as required
Threads ConfigurationASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
FormHex, Threading, Square, Round as per Gauge Etc.
HeadHex, Square, Round, Hex flange, Flat, T-head & Triangular etc.
Neck typeHex, Square, Triangular, Oval & Knurled etc.
Surface TreatmentPassivation /plain
Others FactorOEM, ODM, ±0.03MM tolerance
Manufacturing ProcessWire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing.
PackingIN BULK: carton, pallet, Small Boxes or customer request
Surface CoatingBlack Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request
Test CertificateAs per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
CertificationDual Certified As per ASTM & ASME Codes
Delivery timeRegular product : 7-15 days, Custom product : 2-4 weeks
Place of OriginIndia

Equivalent Grades Stainless Steel 316L Stud Bolt

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
SS 316L1.4404S31603SUS 316L316S1103Ch17N14M3 / 03Ch17N14M2Z3CND17‐11‐02 / Z3CND18‐14‐03X2CrNiMo17-12-2

Chemical Composition Stainless Steel 316L Stud Bolt

GradeCMnSiPSCrMoNiFe
SS 316L0.035 max2.0 max1.0 max0.045 max0.030 max16.00 - 18.002.00 - 3.0010.00 - 14.0068.89 min

Mechanical Properties Stainless Steel 316L Stud Bolt

GradeDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
SS 316L8.0 g/cm31399 °C (2550 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %

Dimensions Of Stainless Steel 316L Stud Bolt

Stainless Steel 316l Stud Bolts Dimensions Chart :

Continuous Thread Studs
Tap End Studs (1.5D Engagement)
Clamping Type Studs
Length Tolerances — LT for Continuous Thread and Clamping Type Studs, and L for Tap End Studs
Double End Studs
stud Dimensions
All dimensions are in mm unless mentioned otherwise
Nominal Size
Diameter, D
inch		Tap End Full
Thread Length,
BM		Umax = 2PMinimum Nut End
Full Thread Length,
Bmin
NominalMin.Max.UNC & NC-5
Thread		UNF Thread8UN ThreadL ≤ 1010 < L ≤ 16L > 16
1/40.3750.3500.4000.1000.071...0.7501.0001.500
5/160.4690.4400.4980.1110.083--0.8751.1251.625
3/80.5630.5320.5940.1250.083--1.0001.2501.750
7/160.6560.6200.6920.1430.100--1.1251.3751.875
1/20.7500.7080.7920.1540.100--1.2501.5002.000
9/160.8440.8020.8960.1670.111--1.3751.6252.125
5/80.9380.8920.9830.1820.111--1.5001.7502.250
3/41.1.251.0751.1750.2000.125--1.7502.0002.500
7/81.3131.2581.3680.2220.143--2.0002.2502.750
11.5001.4381.5620.2500.167--2.2502.5003.000
1 1/81.6881.6251.7500.2860.1670.2502.5002.7503.250
1 1/41.8751.8131.9380.2860.1670.2502.7503.0003.500
1 3/82.0632.0002.1250.3330.1670.2503.0003.2503.750
1 1/22.2502.1882.3130.3330.1670.2503.2503.5004.000
1 5/82.4382.3752.500----0.2503.5003.7504.250
1 3/42.6252.5632.6880.400--0.2503.7504.0004.500
1 7/82.8132.7502.875----0.2504.0004.2504.750
23.0002.9253.0750.444--0.2504.2504.5005.000
2 1/43.3753.3003.4500.444--0.2504.7505.0005.500
2 1/23.7503.6753.8250.500--0.2505.2505.5006.000
2 3/44.1254.0504.2000.500--0.2505.7506.0006.500
34.5004.4254.5750.500--0.250--6.5007.000
3 1/44.8754.7754.9750.500--0.250--7.0007.500
3 1/25.2505.1505.3500.500--0.250--7.5008.000
3 3/45.6255.5255.7250.500--0.250--8.0008.500
46.0005.9006.1000.500--0.250--8.5009.000

Different Types Of Stainless Steel 316L Stud Bolt

Different Types Of Stud Bolts:

Full Threaded Stud Bolt
ASTM A193 SS316L Full Threaded Stud Bolt
Bonding Stud Bolt Flange Stud Bolts
Alloy 316L Bonding Stud Bolt / Flange Stud Bolts
Double End Stud Bolts with Reduced Shank
SS 316L Double End Stud Bolts with Reduced Shank
Dowel Screw type Stud Bolt
SS 316L Dowel Screw type Stud Bolt
Half Threaded Stud Bolt
DIN 1.4404 Half Threaded Stud Bolt
tap end stud bolts
UNS S31603 Tap End Stud Bolt
Double End Stud Bolt
316L SS Double End Stud Bolt
Clinch Stud Bolt
SS 316L Clinch Stud Bolt
Weld Stud Bolt
316L Stainless Steel Weld Stud Bolt

Application of Stainless Steel 316L Stud Bolt

Testing of Stainless Steel 316L Stud Bolt

Packing Of Stainless Steel 316L Stud Bolt

Destination Of Stainless Steel 316L Stud Bolt

Din 1.4404 Full Threaded Stud Bolt Exporter in Jamnagar, UNS S31603 Half Threaded Rod Supplier in Chennai, 316L SS Tap End Stud Bolt Stockist in Coimbatore, ASME SA193 SS 316L Tap End Threaded Rod Manufacturer in Hyderabad, SS 316L Half Threaded Stud Bolt Stockist in Pimpri-Chinchwad, ASTM A193 Stainless Steel 316L Full Threaded Rod Supplier in Bangalore, Stainless Steel 316L Double End Threaded Rod Manufacturer in Pune, SS 316L Double End Stud Bolt Exporter in Ahmedabad.

SS 316L Tap End Stud Bolt Stockist in Dubai, Din 1.4404 Double End Stud Bolt With Reduced Shank Supplier in Argentina, Stainless Steel 316L Bonding Stud Bolt Stockist in Singapore, SS 316L Half Threaded Stud Bolt Exporter in Tanzania, Stainless Steel 316L Full Threaded Stud Bolt Stockist in South Africa, ASME SA193 SS 316L Tap End Threaded Rod Manufacturer in Nigeria, Stainless Steel 316L Double End Stud Bolt Manufacturer in UAE, UNS S31603 Full Threaded Rod Supplier in Qatar, SS 316L Flange Stud Bolt Exporter in Indonesia, Din 1.4404 Half Threaded Rod Exporter in Saudi Arabia, ASTM A193 Stainless Steel 316L Double End Threaded Rod Supplier in Malaysia.

A Wide range of ASTM A193 Stainless Steel 316L Double End Threaded Rod, Stainless Steel 316L Double End Stud Bolt Catalogue, Din 1.4404 Bonding Stud Bolt Specification,Din 1.4404 Full Threaded Rod Price List in India, SS 316L Tap End Threaded Rod at Factory Price, Best Quality of UNS S31603 Flange Stud Bolt, ASME SA193 SS 316L Tap End Stud Bolt Price Per Kg, Stainless Steel 316L Half Threaded Stud Bolt Price List, ASTM A193 Stainless Steel 316L Double End Threaded Rod Grade Chart, SS 316L Full Threaded Stud Bolt Weight Chart, UNS S31603 Half Threaded Rod Weight Calculator.

STAINLESS STEEL Stud BOLT
Stud Bolts
SERVICE DOWNLOADS