Super Duplex UNS S32750 Stud Bolt
ASME SA479 UNS S32750 Full Threaded Stud Bolt, Super Duplex S32750 Full Threaded Rod, ASTM A479 UNS S32750 Double End Stud Bolt, ASTM A479 UNS S32750 Double End Threaded Rod, UNS S32750 Half Threaded Stud Bolt.
What is meant by Super Duplex UNS 32750 Stud Bolt?
The chemical composition of Super Duplex UNS 32750 stud bolts is superbly balanced. The chemical makeup of this grade of stud bolts consists of many components. Nickel (6-8%), chromium (26-28%), and molybdenum (3-5%) make up the bulk of this substance. Each extra component makes up less than 1% of the mix. These elements include copper, carbon, nitrogen, sulfur, phosphorus, and silicon. Due to their exceptional all-around capabilities, these Stud Bolts are employed in several applications throughout numerous sectors. They are used for storage in tanks, pipes, heat exchangers, pressure vessels for transportation, and chemical processing. These Stud Bolts are not advised due to the
frequent liquid cooling resulting in a severe temperature shock. This stud bolt has a long operating life
and is quite accurate. These stud bolts are made with sophisticated, well-equipped gear. These stud bolts’ flexibility is another benefit. This grade of bolts has ferritic and austenitic components in its microstructure. These stud bolts’ increased qualities are a result of their duality.
About Super Duplex UNS S32750 Stud Bolt
Duplex S32205 Tap End Threaded Rod, DIN 1.4410 Tap End Stud Bolt, UNS S32750 Half Threaded Rod, UNS S32750 Flange Stud Bolt, ASTM A479 UNS S32750 Double End Stud Bolt With Reduced Shank, Super Duplex S32750 Bonding Stud Bolt.
This grade of stud bolts has a melting point of 1350 degrees Celsius and a density of 7.8 gm/cm3. An
outer diameter range of 3mm to 200mm is offered for stud bolts made of Duplex Steel 32205. These
fasteners are offered in lengths ranging from M10 to M160. There are just two mechanical
characteristics of the round bar: tensile strength, which has a value of 800 Mpa, and brinner hardness,
which has a value of 290. These stud bolts have been lengthened by 15%. They do, however, have a
yield strength of 550 Mpa. The recommended specifications are ASTM A276, ASTM A479, and ASME
SA479 for these stud bolts. Excellent workability and weldability, better resistance to chloride crevices
and pitting erosion, and excellent general chemical resistance are all features of Super Duplex 32750
Stud Bolts. The form of Square, Hexagonal, Round, etc., are available as per the requirements. These
stud bolts are made using both hot and cold forging techniques. Most likely, these stud bolts won't rust.
The material is subjected to a variety of tests, including macro- and micro-tests, hardness measures,
testing for pitting resistance, flaring tests, enhanced corrosion tests, hardness tests, flattening tests, and
much more, to determine its endurance and quality. Additional surface treatments for the stud bolts
include those composed of xylon, zinc, Teflon, phosphate, etc.
Super Duplex UNS S32750 Stud Bolt Specification
| Specifications | ASTM A479, A182 / ASME SA479, SA182 |
| Standard | DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
| Size | M3 - M100 | 3/6″ - 4″ | Custom Sizes |
| Length | 3 mm - 200 mm | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
| Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
| Surface Treatment | Passivation /plain |
| Others Factor | OEM, ODM, ±0.03MM tolerance |
| Manufacturing Process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
| Packing | IN BULK: carton, pallet, Small Boxes or customer request |
| Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Delivery time | Regular product : 7-15 days, Custom product : 2-4 weeks |
| Place of Origin | India |
Equivalent Grades Super Duplex UNS S32750 Stud Bolt
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex S32750 | 1.4410 | S32750 |
Chemical Composition Super Duplex UNS S32750 Stud Bolt
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| Super Duplex S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
Mechanical Properties Super Duplex UNS S32750 Stud Bolt
| Density (g/cm 3) | Melting Range | Yield Stress (0.2%Offset) | Tensile Stress | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi - 80000 , MPa - 550 | Psi - 116000 , MPa - 800 | 15 % |
Dimensions Of Super Duplex UNS S32750 Stud Bolt
Super Duplex UNS S32750 Stud Bolts Dimensions Chart :
All dimensions are in mm unless mentioned otherwise
| Nominal Size Diameter, D inch | Tap End Full Thread Length, BM | Umax = 2P | Minimum Nut End Full Thread Length, Bmin |
||||||
| Nominal | Min. | Max. | UNC & NC-5 Thread | UNF Thread | 8UN Thread | L ≤ 10 | 10 < L ≤ 16 | L > 16 | |
| 1/4 | 0.375 | 0.350 | 0.400 | 0.100 | 0.071 | ... | 0.750 | 1.000 | 1.500 |
| 5/16 | 0.469 | 0.440 | 0.498 | 0.111 | 0.083 | -- | 0.875 | 1.125 | 1.625 |
| 3/8 | 0.563 | 0.532 | 0.594 | 0.125 | 0.083 | -- | 1.000 | 1.250 | 1.750 |
| 7/16 | 0.656 | 0.620 | 0.692 | 0.143 | 0.100 | -- | 1.125 | 1.375 | 1.875 |
| 1/2 | 0.750 | 0.708 | 0.792 | 0.154 | 0.100 | -- | 1.250 | 1.500 | 2.000 |
| 9/16 | 0.844 | 0.802 | 0.896 | 0.167 | 0.111 | -- | 1.375 | 1.625 | 2.125 |
| 5/8 | 0.938 | 0.892 | 0.983 | 0.182 | 0.111 | -- | 1.500 | 1.750 | 2.250 |
| 3/4 | 1.1.25 | 1.075 | 1.175 | 0.200 | 0.125 | -- | 1.750 | 2.000 | 2.500 |
| 7/8 | 1.313 | 1.258 | 1.368 | 0.222 | 0.143 | -- | 2.000 | 2.250 | 2.750 |
| 1 | 1.500 | 1.438 | 1.562 | 0.250 | 0.167 | -- | 2.250 | 2.500 | 3.000 |
| 1 1/8 | 1.688 | 1.625 | 1.750 | 0.286 | 0.167 | 0.250 | 2.500 | 2.750 | 3.250 |
| 1 1/4 | 1.875 | 1.813 | 1.938 | 0.286 | 0.167 | 0.250 | 2.750 | 3.000 | 3.500 |
| 1 3/8 | 2.063 | 2.000 | 2.125 | 0.333 | 0.167 | 0.250 | 3.000 | 3.250 | 3.750 |
| 1 1/2 | 2.250 | 2.188 | 2.313 | 0.333 | 0.167 | 0.250 | 3.250 | 3.500 | 4.000 |
| 1 5/8 | 2.438 | 2.375 | 2.500 | -- | -- | 0.250 | 3.500 | 3.750 | 4.250 |
| 1 3/4 | 2.625 | 2.563 | 2.688 | 0.400 | -- | 0.250 | 3.750 | 4.000 | 4.500 |
| 1 7/8 | 2.813 | 2.750 | 2.875 | -- | -- | 0.250 | 4.000 | 4.250 | 4.750 |
| 2 | 3.000 | 2.925 | 3.075 | 0.444 | -- | 0.250 | 4.250 | 4.500 | 5.000 |
| 2 1/4 | 3.375 | 3.300 | 3.450 | 0.444 | -- | 0.250 | 4.750 | 5.000 | 5.500 |
| 2 1/2 | 3.750 | 3.675 | 3.825 | 0.500 | -- | 0.250 | 5.250 | 5.500 | 6.000 |
| 2 3/4 | 4.125 | 4.050 | 4.200 | 0.500 | -- | 0.250 | 5.750 | 6.000 | 6.500 |
| 3 | 4.500 | 4.425 | 4.575 | 0.500 | -- | 0.250 | -- | 6.500 | 7.000 |
| 3 1/4 | 4.875 | 4.775 | 4.975 | 0.500 | -- | 0.250 | -- | 7.000 | 7.500 |
| 3 1/2 | 5.250 | 5.150 | 5.350 | 0.500 | -- | 0.250 | -- | 7.500 | 8.000 |
| 3 3/4 | 5.625 | 5.525 | 5.725 | 0.500 | -- | 0.250 | -- | 8.000 | 8.500 |
| 4 | 6.000 | 5.900 | 6.100 | 0.500 | -- | 0.250 | -- | 8.500 | 9.000 |
Different Types Of Super Duplex UNS S32750 Stud Bolt
Different Types Of Studs Bolts:
ASTM B182 Duplex UNS S32750 Full Threaded Stud Bolt
Duplex UNS S32750 Bonding Stud Bolt / Flange Stud Bolts
Duplex UNS S32750 Double End Stud Bolts with Reduced Shank
Duplex UNS S32750 Double End Stud Bolt
ASME SB182 Duplex UNS S32750 Clinch Stud Bolt
Duplex UNS S32750 Weld Stud Bolt
Duplex UNS S32750 Dowel Screw type Stud Bolt
DIN 1.4410 Half Threaded Stud Bolt
UNS S32750 Tap End Stud Bolt
Application of Super Duplex UNS S32750 Stud Bolt
Testing of Super Duplex UNS S32750 Stud Bolt
Packing Of Super Duplex UNS S32750 Stud Bolt
Destination Of Super Duplex UNS S32750 Stud Bolt
ASTM A479 UNS S32750 Full Threaded Stud Bolt Exporter in Jamnagar, Super Duplex S32750 Double End Threaded Rod Manufacturer in Pune, DIN 1.4410 Half Threaded Rod Supplier in Chennai, ASTM A479 UNS S32750 Double End Stud Bolt Exporter in Ahmedabad, UNS S32750 Full Threaded Rod Supplier in Bangalore, UNS S32750 Half Threaded Stud Bolt Stockist in Pimpri-Chinchwad, ASME SA479 UNS S32750 Tap End Threaded Rod Manufacturer in Hyderabad, Duplex S32205 Tap End Stud Bolt Stockist in Coimbatore.
UNS S32750 Tap End Stud Bolt Stockist in Dubai, ASTM A479 UNS S32750 Half Threaded Rod Exporter in Saudi Arabia, ASTM A479 UNS S32750 Half Threaded Stud Bolt Exporter in Tanzania, Super Duplex S32750 Double End Stud Bolt Manufacturer in UAE, ASME SA479 UNS S32750 Tap End Threaded Rod Manufacturer in Nigeria, Super Duplex S32750 Bonding Stud Bolt Stockist in Singapore, ASTM A479 UNS S32750 Double End Stud Bolt With Reduced Shank Supplier in Argentina, DIN 1.4410 Flange Stud Bolt Exporter in Indonesia, Duplex S32205 Full Threaded Stud Bolt Stockist in South Africa, DIN 1.4410 Full Threaded Rod Supplier in Qatar, UNS S32750 Double End Threaded Rod Supplier in Malaysia.
ASME SA479 UNS S32750 Tap End Stud Bolt Price Per Kg, DIN 1.4410 Half Threaded Rod Weight Calculator, Super Duplex S32750 Bonding Stud Bolt Specification, UNS S32750 Double End Threaded Rod Grade Chart, Super Duplex S32750 Half Threaded Stud Bolt Price List, Best Quality of UNS S32750 Flange Stud Bolt, ASTM A479 UNS S32750 Full Threaded Rod Price List in India, UNS S32750 Full Threaded Stud Bolt Weight Chart, ASTM A479 UNS S32750 Tap End Threaded Rod at Factory Price, Duplex S32205 Double End Stud Bolt Catalogue, a Wide range of ASTM A479 UNS S32750 Double End Threaded Rod.
Duplex & Super Duplex Stud BOLT
SERVICE DOWNLOADS