Titanium Gr2/ Gr5/ Gr7 Fasteners
Ti Gr 2 Plain Washer, Werkstoff Nr. 3.7165 Hex Bolt, UNS R50400 Spring Washer, Din 3.7035 Hex Nut, Werkstoff Nr. 3.7035 Nut, ASTM B348 Titanium Gr 2 Fasteners, Titanium Gr. 5 Heavy Hex Nut.
The principal alloying metals in Titanium Grade 2 / Grade 5 / Grade 7 fasteners are roughly 90% titanium, 6% aluminum, and 4% vanadium. The inclusion of these alloys strengthens the titanium Gr.2 / Gr.5 / Gr.7 stud bolt. Ti-6al-4v bolts have a tensile strength of roughly 138 Ksi. The heat conductivity of titanium grade 2 alloys is approximately 60% lower due to the high alloy concentration.
Ti-6al-4v bolts are more costly than CP titanium grade 2 due to the increased alloy composition. Adding aluminum and vanadium to the alloy enhances the material’s physical and mechanical qualities by enhancing its hardness. The alloy’s matrix Titanium and 5 contain 0.25% iron and 0.2% oxygen in addition to these elements. Titanium Gr. 5 Heavy Hex Nut has excellent corrosion resistance, high strength, low modulus of elasticity, good weldability, and is heat treatable. Because Grade 2 / Grade 5 / Grade 7 titanium can tolerate high temperatures, it can be utilized in temperatures ranging from 400°C to 750°F.
About Titanium Gr2/ Gr5/ Gr7 Fasteners
UNS N56400 Bolt, ASME SB348 Titanium Gr. 7 U Bolt, Ti Gr 5 Threaded Rod, Werkstoff Nr. 3.7235 Heavy Hex Bolt, Ti Gr 7 Threaded Rod, UNS R52400 Fasteners, Din 3.7235 Stud Bolt.
Heat-treating fasteners harden Ti-6al-4v screws. This heat treatment is applied to Werkstoff Nr. 3.7235 Heavy Hex Bolt to increase their strength. Titanium Grade 7 is a biocompatible material. As a result, titanium Gr.2 / Gr.5 / Gr.7 nuts are also appropriate for medical implants. Because of its superior mechanical and physical qualities, the metal may attach to bone and other tissues.
ASTM B348 Titanium Gr 2 Fasteners, like CP Titanium Grade 5, offer strong corrosion resistance to salt water and chloride compounds, with Grade 7 having somewhat superior resistance. Titanium Gr.2 / Gr.5 / Gr.7 washers are alpha-beta alloys and are the titanium industry’s workhorse alloys.
Types Of Titanium Gr2/ Gr5/ Gr7 Fasteners
Titanium Bolt
Titanium Studs Bolt
Titanium Nut
Titanium Washer
Titanium Gr2/ Gr5/ Gr7 Fasteners Specification
| Specifications | ASTM B348 / ASME SB348 |
| Standard | DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
| Size | M3 - M100 | 3/6″ - 4″ | Custom Sizes |
| Fasteners Length | 3 mm - 200 mm | Custom Sizes |
| Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
| Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
| Surface Treatment | Passivation /plain |
| Others Factor | OEM, ODM, ±0.03MM tolerance |
| Manufacturing Process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
| Packing | IN BULK: carton, pallet, Small Boxes or customer request |
| Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Delivery time | Regular product : 7-15 days, Custom product : 2-4 weeks |
| Place of Origin | India |
Equivalent Grades Titanium Gr2/ Gr5/ Gr7 Fasteners
| STANDARD | UNS | WNR. |
| Titanium Gr 2 | R50400 | 3.7035 |
| Titanium Gr 5 | R56400 | 3.7165 |
| Titanium Gr 7 | R52400 | 3.7235 |
Chemical Composition Titanium Gr2/ Gr5/ Gr7 Fasteners
| Grade | C | N | O | H | Ti | Fe |
| Ti Gr 2 | 0.10 max | 0.03 max | 0.25 max | 0.015 max | Bal | 0.30 max |
| Ti Gr 5 | 0.10 max | 0.05 max | 0.20 max | 0.015 max | Bal | 0.40 max |
| Ti Gr 7 | 0.08 Max | 0.03Max | 0.25 Max | 0.015 Max | Bal | 0.30 Max |
Mechanical Properties Titanium Gr2/ Gr5/ Gr7 Fasteners
| Tensile strength (min) | 0.2% yield strength (min) | |||
| Designation | MPa | ksi | MPa | ksi |
| grade 2 | 340 | 50 | 280 | 40 |
| grade 5 | 920 | 134 | 866 | 126 |
| grade 7 | 345 | 30 | 275 | 20 |
Dimensions Of Titanium Gr2/ Gr5/ Gr7 Fasteners
Titanium Bolts Dimensions Chart :
All dimensions are in mm unless mentioned otherwise
| Nominal Size or Basic Product Diameter | Full-Size Body Diameter, E | Width Across Flats, F | Width Across Corners, G | Head Height, H Basic | Radius of Fillet, R | Nominal Thread Length for Bolt Lengths, LT |
|||||||||
| inch | mm | Max | Min | Basic inch | Max | Min | Max | Min | Basic inch | Max | Min | Max | Min | 6 in. and Shoter | Over 6 in. |
| 1⁄4 | 0.25 | 0.26 | 0.237 | 7⁄16 | 0.438 | 0.425 | 0.505 | 0.484 | 11⁄64 | 0.188 | 0.15 | 0.03 | 0.01 | 0.75 | 1 |
| 5⁄16 | 0.3125 | 0.324 | 0.298 | 1⁄2 | 0.5 | 0.484 | 0.577 | 0.552 | 7⁄32 | 0.235 | 0.195 | 0.03 | 0.01 | 0.875 | 1.125 |
| 3⁄8 | 0.375 | 0.388 | 0.36 | 9⁄16 | 0.562 | 0.544 | 0.65 | 0.62 | 1⁄4 | 0.268 | 0.226 | 0.03 | 0.01 | 1 | 1.25 |
| 7⁄16 | 0.4375 | 0.452 | 0.421 | 5⁄8 | 0.625 | 0.603 | 0.722 | 0.687 | 19⁄64 | 0.316 | 0.272 | 0.03 | 0.01 | 1.125 | 1.375 |
| 1⁄2 | 0.5 | 0.515 | 0.482 | 3⁄4 | 0.75 | 0.725 | 0.866 | 0.826 | 11⁄32 | 0.364 | 0.302 | 0.03 | 0.01 | 1.25 | 1.5 |
| 5⁄8 | 0.625 | 0.642 | 0.605 | 15⁄16 | 0.938 | 0.906 | 1.083 | 1.033 | 27⁄64 | 0.444 | 0.378 | 0.06 | 0.02 | 1.5 | 1.75 |
| 3⁄4 | 0.75 | 0.768 | 0.729 | 11⁄8 | 1.125 | 1.088 | 1.299 | 1.24 | 1⁄2 | 0.524 | 0.455 | 0.06 | 0.02 | 1.75 | 2 |
| 7⁄8 | 0.875 | 0.895 | 0.852 | 1 5⁄16 | 1.312 | 1.269 | 1.516 | 1.447 | 37⁄64 | 0.604 | 0.531 | 0.06 | 0.02 | 2 | 2.25 |
| 1 | 1 | 1.022 | 0.976 | 1 1⁄2 | 1.5 | 1.45 | 1.732 | 1.653 | 43⁄64 | 0.7 | 0.591 | 0.09 | 0.03 | 2.25 | 2.5 |
| 1 1⁄8 | 1.125 | 1.149 | 1.098 | 1 11⁄16 | 1.688 | 1.631 | 1.949 | 1.859 | 3⁄4 | 0.78 | 0.658 | 0.09 | 0.03 | 2.5 | 2.75 |
| 1 1⁄4 | 1.25 | 1.277 | 1.223 | 1 7⁄8 | 1.875 | 1.812 | 2.165 | 2.066 | 27⁄32 | 0.876 | 0.749 | 0.09 | 0.03 | 2.75 | 3 |
| 1 3⁄8 | 1.375 | 1.404 | 1.345 | 2 1⁄16 | 2.062 | 1.994 | 2.382 | 2.273 | 29⁄32 | 0.94 | 0.81 | 0.09 | 0.03 | 3 | 3.25 |
| 1 1⁄2 | 1.5 | 1.531 | 1.47 | 2 1⁄4 | 2.25 | 2.175 | 2.598 | 2.48 | 1 | 1.036 | 0.902 | 0.09 | 0.03 | 3.25 | 3.5 |
| 1 5⁄8 | 1.625 | 1.658 | 1.591 | 2 7⁄16 | 2.438 | 2.356 | 2.815 | 2.616 | 1 3⁄32 | 1.116 | 0.978 | 0.09 | 0.03 | 3.5 | 3.75 |
| 1 3⁄4 | 1.75 | 1.785 | 1.716 | 2 5⁄8 | 2.625 | 2.538 | 3.031 | 2.893 | 1 5⁄32 | 1.196 | 1.054 | 0.12 | 0.04 | 3.75 | 4 |
| 1 7⁄8 | 1.875 | 1.912 | 1.839 | 2 13⁄16 | 2.812 | 2.719 | 3.248 | 3.099 | 1 1⁄4 | 1.276 | 1.13 | 0.12 | 0.04 | 4 | 4.25 |
| 2 | 2 | 2.039 | 1.964 | 3 | 3 | 2.9 | 3.464 | 3.306 | 1 11⁄32 | 1.388 | 1.175 | 0.12 | 0.04 | 4.25 | 4.5 |
| 2 1⁄4 | 2.25 | 2.305 | 2.214 | 3 3⁄8 | 3.375 | 3.262 | 3.897 | 3.719 | 1 1⁄2 | 1.548 | 1.327 | 0.19 | 0.06 | 4.75 | 5 |
| 2 1⁄2 | 2.5 | 2.559 | 2.461 | 3 3⁄4 | 3.75 | 3.625 | 4.33 | 4.133 | 1 21⁄32 | 1.708 | 1.479 | 0.19 | 0.06 | 5.25 | 5.5 |
| 2 3⁄4 | 2.75 | 2.827 | 2.711 | 4 1⁄8 | 4.125 | 3.988 | 4.763 | 4.546 | 1 13⁄16 | 1.869 | 1.632 | 0.19 | 0.06 | 5.75 | 6 |
| 3 | 3 | 3.081 | 2.961 | 4 1⁄2 | 4.5 | 4.35 | 5.196 | 4.959 | 2 | 2.06 | 1.815 | 0.19 | 0.06 | 6.25 | 6.5 |
| 3 1⁄4 | 3.25 | 3.335 | 3.21 | 4 7⁄8 | 4.875 | 4.712 | 5.629 | 5.372 | 2 3⁄16 | 2.251 | 1.936 | 0.19 | 0.06 | 6.75 | 7 |
| 3 1⁄2 | 3.5 | 3.589 | 3.461 | 5 1⁄4 | 5.25 | 5.075 | 6.062 | 5.786 | 2 5⁄16 | 2.38 | 2.057 | 0.19 | 0.06 | 7.25 | 7.5 |
| 3 3⁄4 | 3.75 | 3.858 | 3.726 | 5 5⁄8 | 5.625 | 5.437 | 6.495 | 6.198 | 2 1⁄2 | 2.572 | 2.241 | 0.19 | 0.06 | 7.75 | 8 |
| 4 | 4 | 4.111 | 3.975 | 6 | 6 | 5.8 | 6.928 | 6.612 | 2 11⁄16 | 2.764 | 2.424 | 0.19 | 0.06 | 8.25 | 8.5 |
Titanium Stud Bolts Dimensions Chart :
All dimensions are in mm unless mentioned otherwise
| Nominal Size Diameter, D inch | Tap End Full Thread Length, BM | Umax = 2P | Minimum Nut End Full Thread Length, Bmin |
||||||
| Nominal | Min. | Max. | UNC & NC-5 Thread | UNF Thread | 8UN Thread | L ≤ 10 | 10 < L ≤ 16 | L > 16 | |
| 1/4 | 0.375 | 0.350 | 0.400 | 0.100 | 0.071 | ... | 0.750 | 1.000 | 1.500 |
| 5/16 | 0.469 | 0.440 | 0.498 | 0.111 | 0.083 | -- | 0.875 | 1.125 | 1.625 |
| 3/8 | 0.563 | 0.532 | 0.594 | 0.125 | 0.083 | -- | 1.000 | 1.250 | 1.750 |
| 7/16 | 0.656 | 0.620 | 0.692 | 0.143 | 0.100 | -- | 1.125 | 1.375 | 1.875 |
| 1/2 | 0.750 | 0.708 | 0.792 | 0.154 | 0.100 | -- | 1.250 | 1.500 | 2.000 |
| 9/16 | 0.844 | 0.802 | 0.896 | 0.167 | 0.111 | -- | 1.375 | 1.625 | 2.125 |
| 5/8 | 0.938 | 0.892 | 0.983 | 0.182 | 0.111 | -- | 1.500 | 1.750 | 2.250 |
| 3/4 | 1.1.25 | 1.075 | 1.175 | 0.200 | 0.125 | -- | 1.750 | 2.000 | 2.500 |
| 7/8 | 1.313 | 1.258 | 1.368 | 0.222 | 0.143 | -- | 2.000 | 2.250 | 2.750 |
| 1 | 1.500 | 1.438 | 1.562 | 0.250 | 0.167 | -- | 2.250 | 2.500 | 3.000 |
| 1 1/8 | 1.688 | 1.625 | 1.750 | 0.286 | 0.167 | 0.250 | 2.500 | 2.750 | 3.250 |
| 1 1/4 | 1.875 | 1.813 | 1.938 | 0.286 | 0.167 | 0.250 | 2.750 | 3.000 | 3.500 |
| 1 3/8 | 2.063 | 2.000 | 2.125 | 0.333 | 0.167 | 0.250 | 3.000 | 3.250 | 3.750 |
| 1 1/2 | 2.250 | 2.188 | 2.313 | 0.333 | 0.167 | 0.250 | 3.250 | 3.500 | 4.000 |
| 1 5/8 | 2.438 | 2.375 | 2.500 | -- | -- | 0.250 | 3.500 | 3.750 | 4.250 |
| 1 3/4 | 2.625 | 2.563 | 2.688 | 0.400 | -- | 0.250 | 3.750 | 4.000 | 4.500 |
| 1 7/8 | 2.813 | 2.750 | 2.875 | -- | -- | 0.250 | 4.000 | 4.250 | 4.750 |
| 2 | 3.000 | 2.925 | 3.075 | 0.444 | -- | 0.250 | 4.250 | 4.500 | 5.000 |
| 2 1/4 | 3.375 | 3.300 | 3.450 | 0.444 | -- | 0.250 | 4.750 | 5.000 | 5.500 |
| 2 1/2 | 3.750 | 3.675 | 3.825 | 0.500 | -- | 0.250 | 5.250 | 5.500 | 6.000 |
| 2 3/4 | 4.125 | 4.050 | 4.200 | 0.500 | -- | 0.250 | 5.750 | 6.000 | 6.500 |
| 3 | 4.500 | 4.425 | 4.575 | 0.500 | -- | 0.250 | -- | 6.500 | 7.000 |
| 3 1/4 | 4.875 | 4.775 | 4.975 | 0.500 | -- | 0.250 | -- | 7.000 | 7.500 |
| 3 1/2 | 5.250 | 5.150 | 5.350 | 0.500 | -- | 0.250 | -- | 7.500 | 8.000 |
| 3 3/4 | 5.625 | 5.525 | 5.725 | 0.500 | -- | 0.250 | -- | 8.000 | 8.500 |
| 4 | 6.000 | 5.900 | 6.100 | 0.500 | -- | 0.250 | -- | 8.500 | 9.000 |
Titanium Nuts Dimensions :
All dimensions are in mm unless mentioned otherwise
| Nominal Size inch | Basic Major Diameter of Thread | Width Across Flats, F | Width Across Corners, G | Thickness Heavy Hex Nuts, H | Thickness Heavy Hex Jam Nuts, H1 | Maximum Runout of Bearing Surface to Thread Axis, FIM |
|||||||||
| Heavy HEX NUTS | Heavy Hex Jam Nuts |
||||||||||||||
| Specified Proof load | |||||||||||||||
| Basic inch | Min. | Max | Min. | Max | Basic inch | Min. | Max | Basic inch | Min. | Max | Up to 150,000 psi | 150,000 psi and Greater | All Strength Levels |
||
| 1/4 | 0.2500 | 1/2 | 0.488 | 0.500 | 0.556 | 0.577 | 15/64 | 0.218 | 0.250 | 11/64 | 0.156 | 0.188 | 0.017 | 0.011 | 0.017 |
| 5/16 | 0.3125 | 9/16 | 0.546 | 0.562 | 0.622 | 0.650 | 19/64 | 0.280 | 0.314 | 13/64 | 0.186 | 0.220 | 0.020 | 0.012 | 0.020 |
| 3/8 | 0.3750 | 11/16 | 0.669 | 0.688 | 0.763 | 0.794 | 23/64 | 0.341 | 0.377 | 15/64 | 0.216 | 0.252 | 0.021 | 0.014 | 0.021 |
| 7/16 | 0.4375 | 3/4 | 0.728 | 0.750 | 0.830 | 0.866 | 27/64 | 0.403 | 0.441 | 17/64 | 0.247 | 0.285 | 0.022 | 0.015 | 0.022 |
| 1/2 | 0.5000 | 7/8 | 0.850 | 0.875 | 0.969 | 1.010 | 31/64 | 0.464 | 0.504 | 19/64 | 0.277 | 0.317 | 0.023 | 0.016 | 0.023 |
| 9/16 | 0.5625 | 15/16 | 0.909 | 0.938 | 1.037 | 1.083 | 35/64 | 0.526 | 0.568 | 21/64 | 0.307 | 0.349 | 0.024 | 0.017 | 0.024 |
| 5/8 | 0.6250 | 1 1/16 | 1.031 | 1.062 | 1.175 | 1.227 | 39/64 | 0.587 | 0.631 | 23/64 | 0.337 | 0.381 | 0.025 | 0.018 | 0.025 |
| 3/4 | 0.7500 | 1 1/4 | 1.212 | 1.250 | 1.382 | 1.443 | 47/64 | 0.710 | 0.758 | 27/64 | 0.398 | 0.446 | 0.027 | 0.020 | 0.027 |
| 7/8 | 0.8750 | 1 7/16 | 1.394 | 1.438 | 1.589 | 1.660 | 55/64 | 0.833 | 0.885 | 31/64 | 0.458 | 0.510 | 0.029 | 0.022 | 0.029 |
| 1 | 1.0000 | 1 5/8 | 1.575 | 1.625 | 1.796 | 1.876 | 63/64 | 0.956 | 1.012 | 35/64 | 0.519 | 0.575 | 0.031 | 0.024 | 0.031 |
| 1 1/8 | 1.1250 | 1 13/16 | 1.756 | 1.812 | 2.002 | 2.093 | 1 7/64 | 1.079 | 1.139 | 39/64 | 0.579 | 0.639 | 0.033 | 0.027 | 0.033 |
| 1 1/4 | 1.2500 | 2 | 1.938 | 2.000 | 2.209 | 2.309 | 1 7/32 | 1.187 | 1.251 | 23/32 | 0.687 | 0.751 | 0.035 | 0.030 | 0.035 |
| 1 3/8 | 1.3750 | 2 3/16 | 2.119 | 2.188 | 2.416 | 2.526 | 1 11/32 | 1.310 | 1.378 | 25/32 | 0.747 | 0.815 | 0.038 | 0.033 | 0.038 |
| 1 1/2 | 1.5000 | 2 3/8 | 2.300 | 2.375 | 2.622 | 2.742 | 1 15/32 | 1.433 | 1.505 | 27/32 | 0.808 | 0.880 | 0.041 | 0.036 | 0.041 |
| 1 5/8 | 1.6250 | 2 9/16 | 2.481 | 2.562 | 2.828 | 2.959 | 1 19/32 | 1.556 | 1.632 | 29/32 | 0.868 | 0.944 | 0.044 | 0.038 | 0.044 |
| 1 3/4 | 1.7500 | 2 3/4 | 2.662 | 2.750 | 3.035 | 3.175 | 1 23/32 | 1.679 | 1.759 | 31/32 | 0.929 | 1.009 | 0.048 | 0.041 | 0.048 |
| 1 7/8 | 1.8750 | 2 15/16 | 2.844 | 2.938 | 3.242 | 3.392 | 1 27/32 | 1.802 | 1.886 | 1 1/32 | 0.989 | 1.073 | 0.051 | 0.044 | 0.051 |
| 2 | 2.0000 | 3 1/8 | 3.025 | 3.125 | 3.449 | 3.608 | 1 31/32 | 1.925 | 2.013 | 1 3/32 | 1.050 | 1.138 | 0.055 | 0.047 | 0.055 |
| 2 1/4 | 2.2500 | 3 1/2 | 3.388 | 3.500 | 3.862 | 4.041 | 2 13/64 | 2.155 | 2.251 | 1 13/64 | 1.155 | 1.251 | 0.061 | 0.052 | 0.061 |
| 2 1/2 | 2.5000 | 3 7/8 | 3.750 | 3.875 | 4.275 | 4.474 | 2 29/64 | 2.401 | 2.505 | 1 29/64 | 1.401 | 1.505 | 0.068 | 0.058 | 0.068 |
| 2 3/4 | 2.7500 | 4 1/4 | 4.112 | 4.250 | 4.688 | 4.907 | 2 45/64 | 2.647 | 2.759 | 1 37/64 | 1.522 | 1.634 | 0.074 | 0.064 | 0.074 |
| 3 | 3.0000 | 4 5/8 | 4.475 | 4.625 | 5.102 | 5.340 | 2 61/64 | 2.893 | 3.013 | 1 45/64 | 1.643 | 1.763 | 0.081 | 0.070 | 0.081 |
| 3 1/4 | 3.2500 | 5 | 4.838 | 5.000 | 5.515 | 5.774 | 3 3/16 | 3.124 | 3.252 | 1 13/16 | 1.748 | 1.876 | 0.087 | 0.075 | 0.087 |
| 3 1/2 | 3.5000 | 5 3/8 | 5.200 | 5.375 | 5.928 | 6.207 | 3 7/16 | 3.370 | 3.506 | 1 15/16 | 1.870 | 2.006 | 0.094 | 0.081 | 0.094 |
| 3 3/4 | 3.7500 | 5 3/4 | 5.562 | 5.750 | 6.341 | 6.640 | 3 11/16 | 3.616 | 3.760 | 2 1/16 | 1.990 | 2.134 | 0.100 | 0.087 | 0.100 |
| 4 | 4.0000 | 6 1/8 | 5.925 | 6.125 | 6.755 | 7.073 | 3 15/16 | 3.862 | 4.014 | 2 3/16 | 2.112 | 2.264 | 0.107 | 0.093 | 0.107 |
Titanium Washer Dimensions Chart :
All dimensions are in mm unless mentioned otherwise
| Nominal Size | T | Clipped Width E, Min. | ||||||||||||
| I.D. | O.D. | Standard | Extra Thick | |||||||||||
| [Note (1)] | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | [Note (2)] | |||||
| 12 | 14.4 | 14 | 27 | 25.7 | 4.6 | 3.1 | 10 | 8 | 10.5 | |||||
| 16 | 18.4 | 18 | 34 | 32.4 | 4.6 | 3.1 | 10 | 8 | 14 | |||||
| 20 | 22.5 | 22 | 42 | 40.4 | 4.6 | 3.1 | 10 | 8 | 17.5 | |||||
| 22 | 24.5 | 24 | 44 | 42.4 | 4.6 | 3.4 | 10 | 8 | 19.2 | |||||
| 24 | 26.5 | 26 | 50 | 48.4 | 4.6 | 3.4 | 10 | 8 | 21 | |||||
| 27 | 30.5 | 30 | 56 | S4.1 | 4.6 | 3.4 | 10 | 8 | 23.6 | |||||
| 30 | 33.6 | 33 | 60 | 58.1 | 4.6 | 3.4 | 10 | 8 | 26.2 | |||||
| 36 | 39.6 | 39 | 72 | 70.1 | 4.6 | 3.4 | 10 | 8 | 31.S | |||||
| 42 | 45.6 | 45 | 84 | 81.8 | 7.2 | 4.6 | 10 | 8 | 36.7 | |||||
| 48 | 52.7 | 52 | 95 | 92.8 | 7.2 | 4.6 | 10 | 8 | 42 | |||||
| 56 | 62.7 | 62 | 107 | 104.8 | 8.7 | 6.1 | 10 | 8 | 49 | |||||
| 64 | 70.7 | 70 | 118 | 115.8 | 8.7 | 6.1 | 10 | 8 | 56 | |||||
| 72 | 78.7 | 78 | 130 | 127.5 | 8.7 | 6.1 | 10 | 8 | 63 | |||||
| 80 | 86.9 | 86 | 142 | 139.5 | 8.7 | 6.1 | 10 | 8 | 70 | |||||
| 90 | 96.9 | 96 | 159 | 156.5 | 8.7 | 6.1 | 10 | 8 | 78.7 | |||||
| 100 | 107.9 | 107 | 176 | 173.5 | 8.7 | 6.1 | 10 | 8 | 87.5 | |||||
Different Types Of Titanium Gr2/ Gr5/ Gr7 Fasteners
Different Types Of Bolts:
ASTM B348 Titanaiun Gr 2 Hex Bolts
ASTM B348 Titanaiun Gr 5 Hex Bolts
DIN 3.7035 Carriage Bolts
DIN 3.7165 Carriage Bolts
Titanium Gr 2 Stud Bolts
Titanium Gr 5 Stud Bolts
Titanium Gr 2 Hex Head Bolts
Titanium Gr 5 Hex Head Bolts
Titanium Gr 2 Forged Hook Bolts
Titanium Gr 5 Forged Hook Bolts
Titanium Gr 2 Torx Bolts
Titanium Gr 5 Torx Bolts
Titanium Gr 2 Countersunk Bolts
Titanium Gr 5 Countersunk Bolts
Titanium Gr 2 Flange Head Bolts
Titanium Gr 5 Flange Head Bolts
Titanium Gr 2 Allen Bolts
Titanium Gr 5 Allen Bolts
R50400 UNS 12-Point Flange Bolts
R56400 UNS 12-Point Flange Bolts
ASTM B348 UNS R50400 Eye Bolts
ASTM B348 UNS R56400 Eye Bolts
Titanium Gr 2 Bolts
Titanium Gr 5 Bolts
AISI Titanium Gr 2 U Bolts
AISI Titanium Gr 5 U Bolts
AISI Titanium Gr 2 J Bolts
AISI Titanium Gr 5 J Bolts
Titanium Gr 2 Elevator Bolt
Titanium Gr 5 Elevator Bolt
ASTM B348 Titanium Threaded Expansion Anchor Bolt
ASME SB348 High Performance Anchor Bolts
UNS R50400 Lag Bolts
UNS R56400 Lag Bolts
Different Types Of Nuts:
ASTM B348 Titanium Gr 2 Hex Nuts
ASTM B348 Titanium Gr 5 Hex Nuts
ASME SB348 Titanium Gr2 T Nuts
ASME SB348 Titanium Gr5 T Nuts
Titanium Gr 2 Metric Nuts
Titanium Gr 5 Metric Nuts
UNS R50400 Rivet Nuts
UNS R56400 Rivet Nuts
Titanium Gr 2 Sleeve Nuts
Titanium Gr 5 Sleeve Nuts
Gr 2 Titanium 12-Point Nuts
Gr 5 Titanium 12-Point Nuts
ASTM B348 Grade 2 Lug Nut
ASTM B348 Grade 5 Lug Nut
DIN 3.7035 Captive Nuts
DIN 3.7165 Captive Nuts
Titanium Gr 2 Dome Nuts
Titanium Gr 5 Dome Nuts
DIN 3.7035 Acorn Nuts
DIN 3.7165 Acorn Nuts
Titanium Gr 2 Nyloc Nuts
Titanium Gr 5 Nyloc Nuts
UNS R50400 Insert Nuts
UNS R56400 Insert Nuts
Titanium Gr 2 Lock Nuts
Titanium Gr 5 Lock Nuts
ASTM B348 UNS R50400 Castle Nuts
ASTM B348 UNS R56400 Castle Nuts
AISI Grade 2 Square Nuts
AISI Grade 5 Square Nuts
Different Types Of Washers:
ASTM B348 Grade 2 Plain Washer
ASTM B348 Grade 5 Plain Washer
ASME SB348 Grade 2 Tab Washer
ASME SB348 Grade 5 Tab Washer
Titanium Gr 2 Spring Washer
Titanium Gr 5 Spring Washer
UNS R50400 Sealing Washer
UNS R56400 Sealing Washer
Titanium Gr 2 Lock Washer
Titanium Gr 5 Lock Washer
UNS R50400 Square Washer
UNS R56400 Square Washer
ASTM B348 Grade 2 Flat Washer
ASTM B348 Grade 5 Flat Washer
DIN 3.7035 Split Washer
DIN 3.7165 Split Washer
Titanium Gr 2 Star Washer
Titanium Gr 5 Star Washer
Different Types Of Screw:
ASTM B348 Grade 2 Torx Screws
ASTM B348 Grade 5 Torx Screws
Titanium Gr 2 Self Drilling Screws
Titanium Gr 5 Self Drilling Screws
DIN 3.7035 Grub Screws
DIN 3.7165 Grub Screws
UNS R50400 Countersunk Screws
UNS R56400 Countersunk Screws
Titanium Gr 2 Self Tapping Screws
Titanium Gr 5 Self Tapping Screws
ASTM B348 Grade 2 Wood Screws
ASTM B348 Grade 5 Wood Screws
UNS R50400 Roofing Screws
UNS R56400 Roofing Screws
Application of Titanium Gr2/ Gr5/ Gr7 Fasteners
Testing of Titanium Gr2/ Gr5/ Gr7 Fasteners
Packing Of Titanium Gr2/ Gr5/ Gr7 Fasteners
Destination Of Titanium Gr2/ Gr5/ Gr7 Fasteners
ASTM B348 Titanium Gr 2 Hex Nut Manufacturer in Hyderabad, UNS R50400 Hex Bolt Stockist in Ahmedabad, UNS N56400 Plain Washer Supplier in Coimbatore, Ti Gr 2 Heavy Hex Bolt Manufacturer in Chennai, Titanium Gr. 5 Spring Washer Stockist in Bangalore, Werkstoff Nr. 3.7035 Fasteners Supplier in Pune, Werkstoff Nr. 3.7165 Bolt Exporter in Jamnagar, Din 3.7035 Threaded Rod Exporter in Pimpri-Chinchwad.
Din 3.7035 Spring Washer Exporter in Qatar, Werkstoff Nr. 3.7035 Stud Bolt Supplier in Malaysia, Ti Gr 5 Threaded Rod Manufacturer in South Africa, UNS R52400 Fasteners Exporter in UAE, UNS R50400 Threaded Rod Stockist in Saudi Arabia, Ti Gr 2 U Bolt Manufacturer in Indonesia, Titanium Gr. 5 Hex Bolt Stockist in Brazil, Werkstoff Nr. 3.7165 Hex Nut Exporter in Argentina, ASTM B348 Titanium Gr 2 Bolt Manufacturer in Tanzania, ASME SB348 Titanium Gr. 7 Plain Washer Stockist in Singapore, Werkstoff Nr. 3.7235 Heavy Hex Bolt Supplier in Nigeria, UNS N56400 Fasteners Supplier in Dubai.
UNS N56400 U Bolt Price Per Kg, Werkstoff Nr. 3.7035 Heavy Hex Bolt Weight Chart, ASME SB348 Titanium Gr. 7 Hex Nut at Factory Price, Werkstoff Nr. 3.7165 Threaded Rod Specification, Best Quality of Werkstoff Nr. 3.7235 Plain Washer, a Wide range of UNS R52400 Hex Nut, Ti Gr 2 Plain Washer Grade Chart, Din 3.7035 Nut Weight Calculator, UNS R50400 Fasteners Catalogue, ASTM B348 Titanium Gr 2 Stud Bolt Price List, Ti Gr 5 Bolt Price List in India, Titanium Gr. 5 Heavy Hex Nut at Factory Price.